| 7210A5TRDUMP3 NSK Super Precision Bearings | Basic static load rating C0:62 kN; Ew:35 mm; Limiting speed:17000 r/min; Fw:25 mm; U:30 mm; Fatigue load limit Pu:7.8 kN; Basic dynamic load rating C:44.6 kN; Mass needle roller and cage assembly:0.065 kg; Reference speed:15000 r/min; |
| 55BTR10STYNDBLP4A NSK Super Precision Bearings | Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:78100 N; Accessories:One Seal; D:110.0000 mm; d:60.000 mm; Oil Speed Rating n2:5000 rpm; B:38.10 mm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.50 mm; |
| 7011CTRDULP3 NSK Super Precision Bearings | B2:29 mm; d:190 mm; r3,4 min.:5 mm; Mass angle ring:4.3 kg; d1 ≈:264 mm; B1:18 mm; |
| 7909CTRSUMP3 NSK Super Precision Bearings | F:45 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.084 kg; d:40 mm; B:30 mm; |
| 7211CTRDUMP3 NSK Super Precision Bearings | Dynamic (Cr):9 mm; with tapered bore:600 min-1; Grease:7420 kN; d:380 mm; Pu:3420 kN; with cylindrical bore:480 min-1; Static (Cor):16.7 mm; rs (min):5 mm; Oil:565.220 kN; D:560 mm; B:180 mm; |
| 7011A5TRSULP3 NSK Super Precision Bearings | Basic static load rating C0:11 kN; Preload class D GD:480 N; D:68 mm; d1:49.2 mm; Calculation factor f1:1; Static axial stiffness, preload class B:56 N/µm; Calculation factor f2D:1.09; Db max.:66 mm; Mass bearing:0.17 kg; Ball diameter Dw:7.938 mm; Static axial stiffness, preload class D:107 N/µm; B:15 mm; Calculation factor f:1.06; Calculation factor f2C:1.05; a:14.8 mm; Fatigue load limit Pu:0.465 kN; |
| 7012A5TRDULP3 NSK Super Precision Bearings | D:125.0000 mm; B:48.00 mm; Basic Static Radial Load Rating Co:110000 N; Oil Speed Rating n2:4800 rpm; Basic Dynamic Radial Load Rating C:104000 N; d:70.000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3700 rpm; Fillet Radius rb:1.00 mm; |
| 7208A5TRSUMP4 NSK Super Precision Bearings | Purpose/ Application:Tillage; l:17 mm; Minimum rotational disc speed min.:90 r/min; Sealing system:SKF Mudblock seal; Recommended maximum temperature max.:50 °C; Shaft design:Shaft with metric ma; Recommended tightening torque for self-locking shaft nut:300 N·m; D:117 mm; Recommended tightening torque for disc screws:100 N·m; d1:28 mm; Minimum tractor speed min.:18 km/h; Maximum load applied to top of disc:3 kN; |
| 45BER19STSULP3 NSK Super Precision Bearings | B:43.00 mm; D:190.0000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; d:90.000 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:160000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:157000 N; |
| 7008A5TRSUMP3 NSK Super Precision Bearings | r3,4 min.:0.3 mm; D:60 mm; s:19.5 mm; Fatigue load limit Pu:2.4 kN; Basic static load rating C0:65.5 kN; Mass bearing (including seat washer where applicable):0.58 kg; Reference speed:2800 r/min; rb max.:0.3 mm; r1,2 min.:1 mm; D3:62 mm; Basic dynamic load rating C:35.8 kN; C:7 mm; ra max.:1 mm; Minimum load factor A:0.026; Limiting speed:3800 r/min; H:41.3 mm; da:30 mm; B:9 mm; d:25 mm; R:50 mm; |
| 7012CTRDULP3 NSK Super Precision Bearings | F:169 mm; E:221 mm; B:42 mm; s:2.5 mm; b:11 mm; Static (Coa):369 kN; D:250 mm; d2:140 mm; d2 (max):181 mm; Pu:36.830 kN; rs (min):3 mm; Dynamic (Ca):310 kN; b1:19 mm; r1s (min):3 mm; |
| 7910CTRDUDLP3 NSK Super Precision Bearings | A1:171.45 mm; Stabilizing ring:2 x 38151-40; Cap bolt:1-8 UNC; RG:3/4 NPT; PG:1/4 NPT; R1:115.888 mm; End plug (suffix Y):EPR 21; Max. speed for Taconite seal:425 r/min; Mass pillow block:160 kg; P180°:133 kN; Taconite seal:TER 160; Cap bolt recommended tightening torque:1220 N·m; da:184.15 mm; Cap bolt, SAE grade:8; H1:179.4 mm; P150°:113 kN; H2:69.85 mm; h:49.212 mm; Pa:48.9 kN; H:358.775 mm; |
| 40BER10STSULP3 NSK Super Precision Bearings | B1:82 mm; G:M 140x2; Mass adapter sleeve assembly:2.8 kg; Hydraulic nut:HMV 28 E; d1:127 mm; d3:165 mm; B4:24 mm; B:22 mm; d:140 mm; |
| 7012CTRDUDLP3 NSK Super Precision Bearings | B:12 mm; Mass bushing:0.016 kg; d:9 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; D:14 mm; Permissible sliding velocity v max.:0.5 m/s; |